Drive Model Numbers; Drive Enclosure And Revision Code; Drive Model Number Structure; Spec Number Structure - YASKAWA F7 User Manual

http://www.aotewell.com

Drive Model Numbers

The model number on the nameplate indicates the design specification, voltage, and rating of the Drive in alphanumeric codes.

Drive Enclosure and Revision Code

The SPEC number on the nameplate indicates the voltage, Drive rating, enclosure type, and the revision code of the Drive in
alphanumeric codes. The SPEC number for Drives that have custom features, i.e. CASE software, will have a SPEC number
that indicates the custom features installed.
No.
2
4
Open Chassis Type (IEC IP00)
Protected so that parts of the human body cannot reach electrically charged parts from the front when the
Drive is mounted in a control panel, also called protected chassis.
TERMS
NEMA Type 1 (IEC IP20)
The Drive is shielded from the exterior, and can thus be mounted to the interior wall of a building
(not necessarily enclosed in a control panel). The protective structure conforms to the standards of NEMA 1
in the USA. All protective covers (Fig 1.4 and Fig 1.6) must be installed to conform with IEC IP20 and NEMA
Type 1 requirements.
Tel: +(86) 755 8660 6182
AC Drive
F7 Family
No. Spec
U
UL Specification
Voltage
No.
2
3-phase, 208-240Vac
4
3-phase, 480Vac
Fig 1.2 Drive Model Number Structure
2 0 2 2 1 E
Voltage
3-phase, 208 - 240Vac
3-phase, 480Vac
Rating
Fig 1.3 SPEC Number Structure
Physical Installation 1 - 4
Aotewell
CIMR – F7 U 2 0 2 2
Rating
Hardware Revision
No.
0
1
Aotewell
Email: Sales@aotewell.com
Enclosure Type
Open chassis (IEC IP00)
NEMA Type 1 (IEC IP20)
http://www.aotewell.com