http://www.aotewell.com
Branch
Circuit
Protection
Tel: +(86) 755 8660 6182
Drive
•
Shielded twisted-pair wires must be used for signal lines.
•
Do not use the PG-B2's power supply for anything other than the pulse generator (encoder).
Using it for another purpose can cause malfunctions due to noise.
•
The length of the pulse generator's wiring must not be more than 100 meters.
•
The direction of rotation of the PG can be set in parameter F1-05 (PG Rotation).
The factory preset is for forward rotation, A-phase advancement.
Fig 2.20 PG-B2 Open-Collector Input Wiring - Sinking PG
Electrical Installation 2 - 35
Aotewell
Power supply +12 V
Power supply 0 V
A-phase pulse open-collector input
B-phase pulse open-collector input
A-phase pulse monitor output
B-phase pulse monitor output
Aotewell
Email: Sales@aotewell.com
http://www.aotewell.com