Drive Main Menus - YASKAWA F7 User Manual

http://www.aotewell.com

Drive Main Menus

The Drive's parameters and monitoring functions are organized into groups called menus that make it easier to read and set
parameters. The Drive is equipped with five menus. The five menus and their primary functions are shown in Table 3.7.
Main Menu
The Drive can run in this menu.
Operation
Use this menu for monitoring values such as frequency reference or output current, displaying fault
- DRIVE -
history or displaying the fault traces.
Quick Setting
The Drive can be programmed in this menu.
- QUICK -
Use this menu to set/read the most commonly used parameters.
Programming
The Drive can be programmed in this menu or parameters can be copied into the Digital Operator.
- ADV -
Use this menu to set/read every parameter.
Modified Constants
The Drive can be programmed in this menu.
- VERIFY -
Use this menu to set/read the parameters that have been modified from their factory default settings.
The Drive can be programmed in this menu.
Auto-Tuning
Use this menu to Auto-Tune the Drive in order to optimize motor control.
- A.TUNE -
The motor parameters are calculated and set automatically after successfully completing Auto-Tuning.
Tel: +(86) 755 8660 6182
Aotewell
Table 3.7 Drive Main Menus
Primary Functions
Digital Operator 3 - 6
Aotewell
Email: Sales@aotewell.com
http://www.aotewell.com