Example Of Changing A Parameter; Changing A Parameter In The Programming Menu - YASKAWA F7 User Manual

http://www.aotewell.com

Example of Changing a Parameter

Table 3.14 provides an example of how to change parameter "C1-02" (Deceleration Time 1) from 30 seconds to 40 seconds.
Step
Digital Operator Display
Number
-DRIVE-
U1-01=
1
- - - - - - - - - - - - - - - - - - - -
U1-02=
U1-03=
-DRIVE-
** Main Menu **
2
- - - - - - - - - - - - - -
-QUICK-
** Main Menu **
3
- - - - - - - - - - - - - -
-ADV-
** Main Menu **
4
- - - - - - - - - - - - - -
-ADV-
- - - - - - - - - - - - - - - - - - - -
5
A1-01=
-ADV-
- - - - - - - - - - - - - - - - - - - -
6
C1-01=
-ADV-
- - - - - - - - - - - - - - - - - - - -
7
C1-01=
Tel: +(86) 755 8660 6182
Table 3.14 Changing a Parameter in the Programming Menu
Rdy
Frequency Ref
0.00Hz
The Drive is first powered up.
0.00Hz
0.00A
Press the MENU key to scroll to "Operation" menu.
Operation
Press the MENU key to scroll to "Quick Setting" menu.
Quick Setting
Press the MENU key to scroll to "Programming" menu.
Programming
Initialization
Press the DATA/ENTER key to enter "Programming" menu.
0
Select Language
Accel/Decel
Press the INCREASE key until C1-01 (Accel/Decel) is displayed.
1.0sec
Accel Time 1
Accel Time 1
Press the SHIFT/RESET key to move flashing digit to the right.
30.0sec
(0.0~6000.0)
"30.0sec"
Aotewell
Digital Operator 3 - 15
Aotewell
Email: Sales@aotewell.com
Description
http://www.aotewell.com