Modified Constants Menu (-Verify-); Auto-Tuning Menu (-A.tune-); Modified Constants Menu Access Procedure; Auto-Tuning Menu Access Procedure - YASKAWA P7 User Manual

!

Modified Constants Menu (-VERIFY-)

This menu is used to set/read the parameters that have been modified from their original factory default settings. Follow the
key operations below (Fig. 3.8) to access the Modified Constants Parameter Menu.
Note 1: If there are not any parameters that have been modified from their original factory default settings, then the display
will state "None Modified". Otherwise, use the "increase" and "decrease" keys to scroll through the "Modified
Constants" list.
!

Auto-Tuning Menu (-A.TUNE-)

This menu is used to auto-tune the Drive in order to optimize motor control as well as utilize the bi-directional speed search
feature. Follow the key operations below (Fig. 3.9) to access the Auto-Tuning Menu.
Use and keys to scroll through the "Auto-Tuning" parameter list.
-VERIFY-
** Main Menu **
- - - - - - - - - - - - - -
Modified Consts
x4
Fig 3.8 Modified Constants Menu Access Procedure
-A.TUNE-
** Main Menu **
- - - - - - - - - - - - - -
Auto-Tuning
x5
Fig 3.9 Auto-Tuning Menu Access Procedure
Table 3.13 Auto-Tuning
Auto-Tuning Parameters
T1-02
T1-04
Digital Operator 3 - 13
Parameter List
Mtr Rated Power
Rated Current
See Note 1
See Note 1
-A.TUNE-
Mtr Rated Power
- - - - - - - - - - - - - - - - - - - -
T1-02= 0.40kW
(0.00~650.00)
"0.40kW"