Dip Switch S1 And Jumper Cn15; Dip Switch S1 And Jumper Cn15 Location; Dip Switch S1 Function; Jumper Cn15 Configuration Options - YASKAWA F7 User Manual

http://www.aotewell.com

DIP Switch S1 and Jumper CN15

Dip Switch S1
DIP Switch S1 is described in this section. The functions of DIP switch S1 are shown in Table 2.13.
Name
S1-1 RS-485 and RS-422 terminating resistance
S1-2 Input method for analog input A2
Jumper CN15
Jumper CN15 is described in this section. The jumper position of CH1 and CH2 determines the signal level of the
multi-function analog output FM and AM, respectively. The functions and positions of CN15 are shown in Table 2.14.
Jumper CN15 Configuration
CH1
CH2
CH1
CH2
CH1
CH2
CH1
CH2
Tel: +(86) 755 8660 6182
S1
Fig 2.10 DIP Switch S1 and Jumper CN15 Location
S1
1
2
Fig 2.11 DIP Switch S1 Function
Table 2.13 DIP Switch S1
Function
Table 2.14 Jumper CN15 Configuration Options
Voltage Output (0-10Vdc) for terminals FM-AC (CH1) and AM-AC (CH2)
Current Output (4-20mA) for terminals FM-AC (CH1) and AM-AC (CH2)
Voltage Output (0-10Vdc) for terminals FM-AC (CH1)
Current Output (4-20mA) for terminals AM-AC (CH2)
Current Output (4-20mA) for terminals FM-AC (CH1)
Voltage Output (0-10Vdc) for terminals AM-AC (CH2)
Electrical Installation 2 - 22
Aotewell
CN15
DIP Switch S1 located on
terminal board.
OFF: No terminating resistance
ON: Terminating resistance of 110Ω
Factory Default = OFF
OFF: 0 to 10Vdc or -10 to 10Vdc (internal resistance: 20KΩ)
ON: 4-20mA (internal resistance: 250Ω)
Factory Default = ON
Analog Output Monitor Configuration
Aotewell
Email: Sales@aotewell.com
ON/OFF
position
Setting
http://www.aotewell.com