Speech Items - Icom ID-31A PLUS Advanced Manual

11
MENU SCREEN

SPEECH items

NOTE: The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version's default settings, see page 11-3�
RX Call Sign SPEECH
MENU > SPEECH > RX Call Sign SPEECH
Turn the RX Call Sign Speech function ON or OFF for
calls received in the DV mode�
Information
L
• When the Digital Squelch function is used, the calling
station's call sign is not announced if the received signal
is not addressed to your call sign, or does not include a
matching digital code�
• When you receive a signal from a repeater ("UR?" or
"RPT?"), the caller station's call sign is not announced�
• While scanning, the transceiver resumes the scan during
an announcement�
• Even if a note is entered after the call sign, it is not
announced�
• When you receive a signal during an announcement, the
transceiver cancels the announcement, and you can hear
the received audio�
• OFF: The caller station's call sign is not
announced, even when a call is
received�
• ON (Kerchunk): The caller station's call sign is
announced only when they make a
short transmission�
• ON (All): The caller station's call sign is
always announced�
RX>CS SPEECH
MENU > SPEECH > RX>CS SPEECH
Turn the RX>CS Speech function ON or OFF�
The RX>CS Speech function announces the station
call sign that is selected from a Received Call Record
by pushing [RX→CS].
L If a call is received during an announcement, the
received audio is muted, and the audio is not recorded
onto the microSD card�
If the call sign is announced while recording, no audio is
recorded�
• OFF: The station call sign is not announced.
• ON: The station call sign is announced.
(Default: ON (Kerchunk))
(Default: ON)
DIAL SPEECH
MENU > SPEECH > DIAL SPEECH
Turn the Dial Speech function ON or OFF�
The Dial Speech function announces the frequency or
repeater call sign that is selected by rotating [DIAL]�
L When using the DR function, the frequency is announced
if the Simplex mode is selected or the FM repeater does
not have a call sign�
L When you receive a signal during an announcement, the
transceiver cancels the announcement, and you can hear
the received audio�
• OFF: The frequency or repeater call sign is not
announced�
• ON: The frequency or repeater call sign is
announced, 1 second after rotating [DIAL]�
In the VFO, Memory, or Call channel mode,
the frequency is announced�
When using the DR function, the repeater call
sign is announced�
MODE SPEECH
MENU > SPEECH > MODE SPEECH
Turn the Operating Mode Speech function ON or OFF�
When this function is ON, the selected operating
mode is announced�
L While the VFO scanning, the operating mode is
announced when you change the mode�
• OFF: The selected operating mode is not
announced�
• ON: The selected operating mode is announced.
SPEECH Language
MENU > SPEECH > SPEECH Language
Set the speech language to English or Japanese�
Alphabet
MENU > SPEECH > Alphabet
Select either "Normal" or "Phonetic Code" to
announce the alphabet characters�
• Normal:
• Phonetic Code: The Phonetic code is used.
11-29
(Default: OFF)
(Default: OFF)
(Default: English)
(Default: Normal)
Normal code is used.
(Example: A as eh, B as bee)
(Example: A as Alfa, B as Bravo)