Icom ID-31A PLUS Advanced Manual page 143

10
REPEATER AND DUPLEX OPERATIONS
Auto Repeater function
When the operating frequency falls within the
Repeater output frequency range, the Auto Repeater
function automatically sets the Repeater settings
(Duplex ON/OFF, Duplex direction, Tone encoder ON/
OFF) The Auto Repeater function uses the preset
Repeater tone frequency and frequency offset
NOTE for the USA version transceiver:
When turned ON, the Auto Repeater function
has priority over the manual Duplex setting If the
transmit frequency changes after setting, the Auto
Repeater function may have changed the Duplex
setting
MENU > Function > Auto Repeater
1 Push [MENU]
2 Select "Function"
3 Select "Auto Repeater"
4 Select the option to turn ON the Auto Repeater
function
• OFF:
• ON (DUP):
• ON (DUP, TONE): Turns ON the Duplex
L To exit the MENU screen, push [MENU]
Frequency range and offset direction
Frequency range
442000 ~ 444995 MHz
447000 ~ 449995 MHz
[Up]
[ENT]
[Down]
Turns OFF the function
Turns ON only the Duplex
operation (Default)
operation and Tone encoder
Shift direction
"DUP+" is set
"DUP–" is set
Off band indication
If the transmit frequency is out of the amateur band,
the off band indication, "OFF BAND," is displayed
when you push [PTT] Check the frequency offset or
duplex direction in this case
(p 10-4)
10-5