Section 2 Using A Microsd Card; About Data Saved On A Microsd Card; Saving Settings Onto A Microsd Card; D Saving As A New File - Icom ID-31A PLUS Advanced Manual

2
USING A microSD CARD

About data saved on a microSD card

The following data can be saved onto the card:
• Transceiver data
Memory channel contents, Repeater List, Your (UR)
call sign memory, and GPS memory that are saved
in the transceiver�
• Communication audio
The transmitted and received audio�
• Communication log
The QSO log and RX history log.

Saving settings onto a microSD card

Memory channels, settings on the MENU screen, and
Repeater List can be saved on the microSD card.
Saving data on the microSD card enables you
to easily restore the transceiver to its previous
configuration, even if you perform an All reset.
You can save settings data as a new file, or you can
overwrite to the current file.

D Saving as a new file

MENU > SD Card > Save Setting
1� Push [MENU]�
2� Select "SD Card."
3� Select "Save Setting."
4� Select "<<New File>>."
• The file is named in the following format:
Setyyyymmdd_xx
(yyyy: Year, mm: month, dd: day, xx: file number).
L To change the file name, see page iii on how to enter
characters�
[Up]
[ENT]
[Down]
• Automatic answering voice audio in the DV mode
Voice audio to use with the Auto Reply function in
the DV Mode�
• Voice audio for the Voice TX function
Voice audio to use with the Voice TX function.
• Position data from the GPS receiver
Position and time data from a GPS receiver that is in
a log file as a route.
• Voice Recorder
The microphone audio�
5� Push [ENT]�
6� Select <YES>.
• While saving, a progress bar is displayed. When
saving is completed, the SD CARD screen is
displayed.
L To exit the MENU screen, push [MENU].

D Overwriting a current file

To overwrite data in a current file, select the file you
want to overwrite in step 4 to the left.
TIP: Data is saved in the "icf" file format. You can
copy the icf data on a PC and edit it using the
CS-31PLUS
cloning software
2-2
�