Clearing A Memory Channel Content - Icom ID-31A PLUS Advanced Manual

7
MEMORY OPERATION

Clearing a Memory channel content

You can clear the entered Memory channel content�
1� Push [M/CALL] to enter the Memory mode�
2� Hold down [S�MW] for 1 second�
• Enters the Select Memory Write mode�
• The Memory channel number blinks�
3� Rotate [DIAL] to select a Memory channel�
4� Push [QUICK]�
5� Select "Clear�"
• The confirmation dialog is displayed.
6� Select <YES>�
▼
• The content is cleared�
Blinks
[Up]
[ENT]
[Down]
NOTE:
• A cleared content cannot be recovered�
• If you clear all the Program Scan Edge channels
contents, you cannot use the Program scan�
TIP: You can also clear the following contents
depending on the selected Memory channel:
• 000 ~ 499:
• C0, C1:
• 00A/00B ~ 24A/24B: Program Scan Edge channel
7-11
Memory channel content
Call channel content
content