Optional Hm-75Ls; D Assigning A Remote Control Function; Remote Control Speaker Microphone - Icom ID-31A PLUS Advanced Manual

13
OPTIONS

Optional HM-75LS

The optional HM-75LS enables you to remotely select
operating frequencies, Memory channels, and other
functions�
You can assign some functions to the keys on the
HM-75LS for simple remote control operation�
(pp� 11-36, 11-37)
The HM-75LS has a lock switch on the back to
prevent accidental frequency changes�
NOTE:
• BE SURE to turn OFF the transceiver when
plugging or unplugging the HM-75LS into or from
the [MIC/SP] jack�
• Firmly plug the HM-75LS into the transceiver�

D Assigning a Remote Control function

Example: Assigning the "TO (DR)" function to the [A]
key�
MENU > Function > Remote MIC Key
1� Push [MENU]�
2� Select "Function�"
3� Select "Remote MIC Key�"
4� Select "During RX/Standby�"
5� Select "[A]�"
• The Assignable function list is displayed�
L About the functions, see pages 11-36 and 11-37�

remote control speaker microphone

[Up]
[ENT]
[Down]
Microphone
TX indicator
[PTT]
Speaker
OFF ON
LOCK
Lock switch
6� Select "TO (DR)�"
• The "TO (DR)" function is assigned�
L To exit the MENU screen, push [MENU]�
TIP: To return to the default settings
On the DURING RX/STANDBY screen or DURING
TX screen, push [QUICK] and select "Default All�"
On the each key screen, push [QUICK] and select
"Default�"
13-3
[A]
[]
A
A
B
B
[B] []