Vfo Frequency And A Memory/Bank Scan; D When A Signal Is Received - Icom ID-31A PLUS Advanced Manual

9
PRIORITY WATCH

VFO frequency and a Memory/Bank scan

Sequentially checks the Memory or Bank channels
every 5 seconds, while receiving on a VFO frequency�
VFO 0
frequency 1
SKIP
2
(Receiving
for 5 seconds)
499
M-CH
When using a
Memory scan
Step 1. Set the VFO frequency
(See BASIC MANUAL section 3)
1� Push [V/MHz] to enter the VFO mode�
2� Set the frequency and operating mode (FM/DV)
you want to monitor�
Step 2. Start a Memory or Bank scan
To start a Memory scan (p� 8-9)
1� Push [M/CALL] to enter the Memory mode�
2� Hold down [SCAN] for 1 second�
• Opens the Scan Type Select window�
3� Select a scan type�
• The scan starts�
To start a Bank scan (p� 8-10)
1� Push [M/CALL] to enter the Memory mode�
2� Push [QUICK]�
3� Select "Bank Select�"
4� Select a Bank to be scanned�
5� Hold down [SCAN] for 1 second�
• Opens the Scan Type Select window�
6� Select a scan type�
• The scan starts�
Step 3. Starts the Priority watch (p� 9-2)
1� Push [QUICK]�
2� Select "PRIO Watch�"
3� Select a Priority watch option�
• "P" is displayed, and the Priority watch starts�
Example: Sequentially checks the Memory channels
while receiving on 433�3625 MHz�
▲▼
00
VFO
01
SKIP
frequency
02
(Receiving
for 5 seconds)
99
Bank CH
When using a
Bank scan
Memory scan
every 5 seconds
Step 4. Canceling the Priority watch (p� 9-2)
Push [CLR] to cancel it�
• "P" disappears�

D When a signal is received

When the Priority watch option is set to "ON":
When a signal is received on a Memory channel, the
channel is automatically selected�
• The "P" icon blinks�
L The scan pause timer and resume settings are the same
as those for a normal scan� (p� 11-5)
When the Priority watch option is set to "Bell":
When a signal is received on a Memory channel, the
display remains in the VFO mode�
• Beeps sound and the "S" icon blinks�
9-7
Automatically selects
the Memory channel�
Remains in the VFO mode�