Rx History Items - Icom ID-31A PLUS Advanced Manual

11
MENU SCREEN

RX History items

RX History
MENU > RX History
When a call is received in the DV mode, the call
information such as the caller station's call sign or the
repeater's call sign are saved on this screen� Up to 50
records can be saved�
L Even if the transceiver is turned OFF, the saved records
are not deleted�
TIP: To display the RX record contents
On the RX HISTORY screen, push [Up] or [Down]
to display the RX record contents (RX01 ~ RX50)�
Contents of the RX History Top screen
RX01 ~ RX50 RX history number
CALLER Displays the caller station's name�
* 1
CALLED Displays the called station's name�
* 1
Displays any message included in
MESSAGE
the received call, if entered�
Displays the date and time the call
RX TIME
was received�
Displays when a call is received
GW
through the internet�
Displays when position data is
GPS included� (NMEA or Mobile/Base
*
2
station)
Displays when the Object's data is
OBJ
* 2
included�
Displays when the Item's data is
ITEM
* 2
included�
Displays when the weather station's
WX
* 2
data is included�
Displays when an uplink signal is
(UP)
received�
* 1 You can change the display type in the Quick Menu
window� When you select "Call Sign Display," the call sign
and a note that is entered after the call sign are displayed�
If the name is not entered, the call sign and a note that is
entered after the call sign are displayed�
* 2 Displayed if position data is included in received data�
* 3 "FREQUENCY" is displayed instead of these items when
the call was not through a repeater (Simplex call)�
* 4 If you have no position data, these items are not
displayed�
Contents of the detail screen
The contents of the detail screen differ, whether
position data is included in received data or not�
Position data that is included in received data can be
divided into 5 categories� Depending on the caller's
TX mode or TX format, the displayed items and these
meanings differ�
The following lists show the items for each category�
L No data is displayed when no position data is received�
TIP: On the RX HISTORY screen, push [ENT] to
display the detail screen�
Common items
CALLER
* 1
CALLED
* 1
RXRPT1 ,
* 1 * 3
RXRPT2 ,
* 1 * 3
MESSAGE
RX TIME
<1. When the caller's TX mode is NMEA>
Compass* 4
Latitude
Longitude
GL
ALT
DST* 4
COURSE
SPEED
GPS Time
Stamp
Call sign
GPS
MESSAGE
11-20
Displays the caller station's name
Displays the called station's
name �
* 1
Displays the name of the repeater
that was accessed by the caller
station�
If it was a call through a gateway
and the Internet, this item displays
the Gateway repeater name of your
local area repeater�
Displays the name of the repeater
you received the call from�
Displays any message included in
the received call, if entered�
Displays the date and time the call
was received�
Displays the caller's direction from
your position�
Displays the caller's latitude�
Displays the caller's longitude�
Displays the grid locator based on
the caller's latitude and longitude�
Displays the caller's altitude�
Displays the caller's distance from
your position�
Displays the caller's direction over
ground�
Displays the caller's speed�
Displays the time that the caller
acquired the position data�
Displays the caller's call sign�
Displays the GPS message
included in the position data of the
received call�
�
* 1