Icom ID-31A PLUS Advanced Manual page 52

4
D-STAR OPERATION
Data communication
D DV Fast Data function
To send data using the DV Fast Data function, follow
the instructions below
L The DV Fast Data communication can be made by
only the following Icom transceivers:
ID-31A/E PLUS, ID-4100A/E, ID-5100A/E*, or ID-
51A/E (PLUS, PLUS2, 50th Anniversary model)
(As of November 2017)
*
Usable only when fi rmware versions CPU M 1.10,
S 100, C 110, and DSP 110 or later are installed
NOTE: If you want to send GPS data to other
transceivers that can receive only slow speed data,
set GPS Data Speed to "Slow" (p 11-26)
(MENU > DV Set > DV Fast Data > GPS Data Speed)
DV Set > DV Fast Data > Fast Data
1 Push [MENU]
2 Select "DV Set"
3 Select "DV Fast Data"
4 Select "Fast Data"
5 Select "ON"
L To exit the MENU screen, push [MENU].
TIP: When you connect the transceiver to an
Android device, you can use the DV Fast Data
function with the RS-MS1A

software
Transceiver
4-28
remote control
To the
USB port
OPC-2350LU
Android
device