Icom ID-31A PLUS Advanced Manual page 180

11
MENU SCREEN
Function items
• During RX/Standby:
Function
--- No function
Push to increase the frequency, Memory channel,
UP
repeater, or station call sign�
Push to decrease the frequency, Memory channel,
DOWN
repeater, or station call sign�
VOL UP Push to increase the volume level�
VOL DOWN Push to decrease the volume level�
Monitor Hold down [SQL] to open the squelch�
(Push) Release to close the squelch�
Monitor (Hold) Push to open or close the squelch�
CALL Push to select a Call channel�
In the Memory mode, push to select Memory
MR (000 CH)
channel 000�
In the Memory mode, push to select Memory
MR (001 CH)
channel 001�
Push to select the VFO mode and the Memory
VFO/MR
mode�
DR Push to turn the DR function ON or OFF�
FROM (DR) On the DR screen, push to select "FROM�"
TO (DR) On the DR screen, push to select "TO�"
Push to directly select the Home CH that is set to the
selected mode (VFO/Memory) or DR screen�
Home CH
While in the CALL CH mode, or when no Home CH
is set, an error beep sounds�
Push to start a scan�
SCAN
While scanning, push to stop the scan�
Push to set the frequency to be skipped during
Temporary scanning�
Skip The selected frequencies are temporarily skipped for
faster scanning�
Hold down for 1 second to set the last calling
RX>CS
station's call sign to "TO" (destination)�
Push to announce the frequency, operating mode or
call sign�
L In the VFO, Memory or Call channel mode, the
SPEECH
frequency and the operating mode are announced�
L In the DR screen, the call sign is announced� If Simplex
is selected, the frequency is announced�
Push to transmit the voice audio recorded on the
microSD�
Voice TX
Hold down for 1 second to repeatedly transmit the
voice audio�
Description
11-37
Remote MIC Key
[A] [B]
[]
●
●
●: Default setting
[]
●
●