Icom ID-31A PLUS Advanced Manual page 203

12
OTHER FUNCTIONS
Cloning function
D Transceiver-to-Transceiver cloning using a microSD card (Continued)
Step 3. Loading the setting data into the sub
transceiver.
MENU > SD Card > Load Setting
1� Push [MENU]�
2� Select "SD Card�"
3� Select "Load Setting�"
4� Select a file to load�
5� Select the loading option�
• ALL: Loads all memory channels, Menu screen
item settings and the repeater list into the
transceiver�
• Except My Station:
Loads all memory channels, Menu screen
item settings and the repeater list except
MY call signs and TX message into the
transceiver�
• Repeater List Only:
Loads only the repeater list into the
transceiver�
• The confirmation dialog is displayed.
6� Select <YES> or <NO>�
• YES: Retains the skip settings of the repeater
list� (p� 4-39)
• NO: Does not retain the skip settings of the
repeater list�
• When you select <YES> or <NO>, the confirmation
dialog is displayed�
[Up]
[ENT]
[Down]
7� Select <YES>�
• Starts the file check.
L While checking the file, displays "CHECKING FILE"
and a progress bar�
• After checking, settings data loading begins�
L While loading, "LOADING" and a progress bar are
displayed�
• After loading ends, "COMPLETED!" is displayed�
L To complete the loading, restart the transceiver�
12-13