Icom ID-31A PLUS Advanced Manual page 89

5
GPS OPERATION
GPS Memory
D Add a GPS Memory (Continued)
7. Entering the GPS Memory altitude
1� Select "ALTITUDE."
Rotate [DIAL] to select plus or
2�
minus.
3� Push [CD] or [CS] to move the
cursor to select a digit to enter.
4� Rotate [DIAL] to enter the altitude.
L Set to between –32808 and +32808 feet.
5� Repeat steps 3 and 4 to enter the altitude.
6� After entering, push [ENT].
8. Selecting a GPS Memory group
1� Select "GROUP."
2� Select the group between
(No Group) and A ~ Z.
L You can save up to 200 Memories in each group.
9. Writing the GPS Memory
1� Select "<<Add Write>>."
[Up]
[ENT]
[Down]
2� Select <YES>.
[Up]
[ENT]
[Down]
5-22
• The confirmation dialog is displayed.
L If you edit a previously added GPS Memory, select
"<<Overwrite>>."
• The data is added to the GPS memory, and then the
selected GPS Memory group screen is displayed.
L To exit the MENU screen, push [MENU].
TIP:
To view the entered content:
Select the GPS Memory channel. Rotate [DIAL] to
check the whole content.
To cancel the entered data:
While entering or editing the GPS Memory, push
[CLR] to display the confirmation dialog, as shown
below.
Select <YES> to cancel entering and the display
returns to the GPS Memory group screen.
[Up]
[ENT]
[Down]