Changing The Qso Recorder Settings - Icom ID-31A PLUS Advanced Manual

6
VOICE MEMORY FUNCTION

Changing the QSO recorder settings

You can change the recording setting on the MENU
screen�
See pages 11-6 and 11-7 for details.
Record only the received audio
MENU > Voice Memo > QSO Recorder > Recorder
Set > REC Mode
L The default setting is "TX&RX" (Both transmit and
receive audio are recorded).
Continue to record, even while the squelch is
closed
MENU > Voice Memo > QSO Recorder >
Recorder Set > RX REC Condition
L The default setting is "Squelch Auto" (Records only
while the squelch is open).
Record the QSO audio as one file
MENU > Voice Memo > QSO Recorder >
Recorder Set > File Split
L The default setting is "ON" (transmit and receive
audio are separately recorded in different files).
L When RX REC Condition is set to "Squelch
Auto," an audio file is created every time the
squelch opens. The received audio is recorded in a
separated file.
Synchronize the recording to PTT
MENU > Voice Memo > QSO Recorder >
Recorder Set > PTT Auto REC
L The default setting is "ON" (Recording is
synchronized to PTT).
TIP: When PTT Auto REC is set to "ON"
• Starts recording not only when PTT is pushed,
but also when switched to transmit by a CI-V
command or by the VOX function.
• When REC Mode is set to "RX Only," the transmit
audio is not recorded�
• A signal that is received within 10 seconds after
the squelch is closed is recorded in the same file.
Change the Skip Tire
MENU > Voice Memo > QSO Recorder > Player Set
> Skip Tire
L The default setting is "10sec."
6-4