Table of Contents
Advertisement
11
MENU SCREEN
Display items
NOTE: The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version's default settings, see page 11-3�
Backlight
MENU > Display > Backlight
Select an option for the transceiver backlight�
• OFF:
The backlight does not light�
• ON:
The backlight lights continuously�
• Auto:
The backlight lights when you
push a key or rotate [DIAL], and
goes out after the set period of
time in the Backlight Timer�
• Auto (DC IN:ON): The backlight lights when you
push a key or rotate [DIAL], and
goes out after the set period of
time in the Backlight Timer�
L When an external DC power
source is connected, lights
continuously�
Backlight Timer
MENU > Display > Backlight Timer
Set the Backlight Timer to 5 or 10 seconds�
Depending on the Backlight option, the backlight
lights for this set period of time, and then automatically
goes out�
LCD Dimmer
MENU > Display > LCD Dimmer
Set the LCD backlight brightness level�
• Bright: The LCD backlight brightness level is bright�
• Dark: The LCD backlight brightness level is dim�
LCD Contrast
MENU > Display > LCD Contrast
Set the LCD Contrast level to between 1 (the lowest)
and 16 (the highest)�
Busy LED
MENU > Display > Busy LED
Usually, the TX/RX indicator lights green while
receiving a signal, or the squelch is open� The
indicator can be turned OFF to conserve battery
power�
• OFF:
The indicator does not light, even if a signal
is received�
• ON:
The indicator lights green while receiving a
signal, or the squelch is open�
(Default: Auto (DC IN: ON))
(Default: 5sec)
(Default: Bright)
(Default: 8)
(Default: ON)
RX Call Sign
MENU > Display > RX Call Sign
Select whether or not to display the call sign and the
message of the caller station, when a call is received
in the DV mode�
L When this item is set to "Auto" or "Auto (RX Hold)," and if
you enter the caller station's call sign and name in Your
Call Sign, the entered name is displayed with "( )" after
the call sign�
(MENU > DV Memory > Your Call Sign)
• OFF:
• Auto:
• Auto (RX Hold): The caller station's call sign scroll
RX Message
MENU > Display > RX Message
Select whether or not to display and scroll a received
message�
• OFF: Does not display the message� To check the
message, hold down [CD] for 1 second to
display the call record�
• Auto: Automatically displays and scrolls the
message� The message is automatically
displayed every 30 seconds until the signal
disappears�
When "Auto" or "Auto (RX Hold)" is selected in
RX Call Sign, the message is displayed after
displaying the caller station's call sign�
Reply Position Display
MENU > Display > Reply Position Display
Select whether or not to display the caller's position in
a dialog when the Auto Reply signal contains a caller
station's position�
• OFF: Does not display the caller's position�
• ON: Displays the caller's position�
11-41
(Default: Auto)
Turns OFF the function�
The caller station's call sign scroll
only once across the display�
once, and then the call sign is
continuously displayed until the
signal disappears�
(Default: Auto)
(Default: ON)
Advertisement
Chapters
Table of Contents
