Voice Memo Items (For Record/Playback) - Icom ID-31A PLUS Advanced Manual

11
MENU SCREEN

Voice Memo items (For Record/Playback)

NOTE: The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version's default settings, see page 11-3�
<<REC Start>>
MENU > Voice Memo > QSO Recorder >
<<REC Start>>
After selecting "<<REC Start>>," push [ENT] to start
QSO recording�
• "Recording started�" is displayed�
Information
L
• BE SURE to insert a microSD card�
• While recording, "<<REC Stop>>" is displayed on the QSO
RECORDER screen� To stop recording, select "<<REC
Stop>>�"
• Once recording has started, the recording will continue,
even if the transceiver is turned OFF and then ON again�
Play Files
MENU > Voice Memo > QSO Recorder > Play Files
Follow the instructions below to play back the
recorded QSO audio on the microSD card�
L BE SURE to insert a microSD card�
<Playing back>
1� Select "Play Files�"
• Displays the folders on the microSD card
L These folders contain the recorded audio files.
2� Select a folder that includes an audio file to play
back�
3� Select a file to play back�
• The VOICE PLAYER screen is displayed and the
selected file is played back.
L See "The VOICE PLAYER screen description" for
forwarding or rewinding� (p� 6-3)
NOTE:
• The folder name is automatically created, as
shown below:
(Example)
Recording date: 31st October 2017
Folder name: 20171031
• The file name is automatically created, as shown
below:
(Example)
Recording date and time:
File name:
• The voice audio is recorded onto a microSD
card, and saved in the "wav" format� ("�wav" is not
displayed on the transceiver's screen�)
• The recorded voice audio can also be played back
on a PC�
31st October 2017
15:30:00
20171031_153000
REC Mode
MENU > Voice Memo > QSO Recorder > Recorder
Set > REC Mode
Records both the transmit (TX) and receive (RX)
audio as the default�
• TX&RX: Records both the transmit and receive
voice audio�
• RX Only: Records only the receive voice audio�
TIP: When transmitted while recording
When File Split is set to "OFF," the recording
is paused while transmitting. After you finish
transmitting, the recording resumes�
When File Split is set to "ON," a new file is
automatically created, and the voice audio is
recorded into the new file.
( MENU > Voice Memo > QSO Recorder > Recorder
Set > File Split)
RX REC Condition
MENU > Voice Memo > QSO Recorder > Recorder
Set > RX REC Condition
Select whether or not the squelch status affects the
receive voice audio recording�
• Always: The transceiver always records the
receive voice audio regardless of the
squelch status�
• Squelch Auto: The transceiver records the receive
voice audio only when a signal is
received (the squelch is opened)�
When the squelch closes while
recording, the recording will continue
for 2 seconds, and then pause�
File Split
MENU > Voice Memo > QSO Recorder > Recorder
Set > File Split
Turn the File Split function ON or OFF�
• OFF: Once a recording starts, the transceiver
continues to record on the same file.
L If the file size exceeds 2 GB, a new file is
automatically created in the same folder, and
the voice audio is recorded there�
• ON: During recording, if transmission and
reception, or squelch status (open and close)
is changed, a new file is automatically created
in the same folder, and the voice audio is
saved into a new file.
11-6
(Default: TX&RX)
(Default: Squelch Auto)
(Default: ON)