Icom ID-31A PLUS Advanced Manual page 88

5
GPS OPERATION
GPS Memory
D Add a GPS Memory (Continued)
3. Entering the GPS Memory date
1� Select "DATE."
2� Push [CD] or [CS] to move the
cursor to select a digit to enter.
3� Rotate [DIAL] to enter the date.
L Set to between 2000/01/02 and 2099/12/30.
4� Repeat steps 2 and 3 to enter the date.
5� After entering, push [ENT].
4. Entering the GPS Memory time
1� Select "TIME."
2� Push [CD] or [CS] to move the
cursor to select a digit to enter.
3� Rotate [DIAL] to enter the time.
L Set to between 00:00:00 and 23:59:59.
4� Repeat steps 2 and 3 to enter the time.
5� After entering, push [ENT].
5. Entering the GPS Memory latitude
1� Select "LATITUDE."
[Up]
2� Push [CD] or [CS] to move the
[ENT]
[Down]
3� Rotate [DIAL] to enter the latitude.
4� Repeat steps 2 and 3 to enter the latitude.
5� After entering, push [ENT].
[Up]
[ENT]
[Down]
6. Entering the GPS Memory longitude
1� Select "LONGITUDE."
2� Push [CD] or [CS] to move the
3� Rotate [DIAL] to enter the
4� Repeat steps 2 and 3 to enter the longitude.
5� After entering, push [ENT].
5-21
cursor to select a digit to enter.
Information
L
• Set to between 0°00.00' to 90°00.00'.
• You can change the unit to "ddd°mm'ss"." (p. 11-41)
• To enter a north latitude, select "N," and to enter a
south latitude, select "S."
cursor to select a digit to enter.
longitude.
Information
L
• Range: Set to between 0°00.00' to 180°00.00'.
• You can change the unit to "ddd°mm'ss"." (p. 11-41)
• To enter an east longitude, select "E," and to enter a
west longitude, select "W."
►Continued on the next page.
[Up]
[ENT]
[Down]
[Up]
[ENT]
[Down]