Table of Contents
Advertisement
11
MENU SCREEN
DV Set items
NOTE: The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version's default settings, see page 11-3�
RX Bass
MENU > DV Set > Tone Control > RX Bass
Select the receive audio bass filter level.
• Cut:
Reduces the low frequencies�
• Normal: Normal tone balance�
• Boost: Increases the low frequencies�
RX Treble
MENU > DV Set > Tone Control > RX Treble
Select the receive audio treble filter level.
• Cut:
Reduces the high frequencies�
• Normal: Normal tone balance�
• Boost: Increases the high frequencies�
RX Bass Boost
MENU > DV Set > Tone Control > RX Bass Boost
Turn the Receive Audio Bass Boost function ON or
OFF�
L This function is different from the "Boost" setting of
RX Bass�
• OFF: Turns OFF the function�
• ON: This function boosts the receive audio bass�
TX Bass
MENU > DV Set > Tone Control > TX Bass
Select the transmit audio bass filter level.
• Cut:
Reduces the low frequencies�
• Normal: Normal tone balance�
• Boost: Increases the low frequencies�
(Default: Normal)
(Default: Normal)
(Default: OFF)
(Default: Normal)
11-26
TX Treble
MENU > DV Set > Tone Control > TX Treble
Select the transmit audio treble filter level.
• Cut:
Reduces the high frequencies
• Normal: Normal tone balance
• Boost: Increases the high frequencies
Auto Reply
MENU > DV Set > Auto Reply
Select an option for the Automatic Reply function in
the DV mode� This function automatically replies to a
call addressed to your own call sign, even if you are
away from the transceiver�
L When "ON" or "Voice" is selected, the Automatic Reply
function is automatically turned OFF when you push
[PTT]� When "Position" is selected, the Automatic Reply
function is not turned OFF, even if you push [PTT]�
• OFF:
Turns OFF the function�
• ON:
Replies with your own call sign (No audio
reply is sent)�
• Voice:
Replies with your call sign and any Auto
Reply message recorded on the SD (up to
10 seconds)�
L The transmitted audio can be monitored�
L If no microSD card is inserted, or no
message is recorded, only your call sign is
transmitted�
• Position*: Replies with your own call sign and
transmits your position data using the
internal or external GPS receiver�
* When GPS Select is set to "OFF" or "Manual," the internal
GPS receiver is temporarily turned ON�
When GPS Select is set to "External GPS," but if the
external GPS receiver is not connected, the internal GPS
receiver is temporarily turned ON�
DV Data TX
MENU > DV Set > DV Data TX
Select whether or not to manually or automatically
transmit data in the DV mode�
• PTT: Push [PTT] to manually transmit data�
• Auto: When data is input from a PC through the
[DATA] jack, the transceiver automatically
transmits it�
(Default: Normal)
(Default: OFF)
(Default: Auto)
Advertisement
Chapters
Table of Contents
