Icom ID-31A PLUS Advanced Manual page 34

4
D-STAR OPERATION
"TO" (Destination) setting
D Using "Your Call Sign"
The "Your Call Sign" memory saves individual or
repeater station call signs When you select the call
sign for the "TO" (Destination) setting, you can make
a Gateway call When you call an individual station
through a gateway, the signal is automatically sent to
the last repeater that the individual station accessed
Therefore, even if you do not know where the
individual station is located, you can make a call
NOTE: If the repeater, set in "FROM" (Access
repeater) has no Gateway call sign, you cannot
make a gateway call
Example: Selecting "Rick" from "Your Call Sign"
1 Hold down [DR] for 1 second to display the DR
screen
2 Push [RX→CS] to select "TO," then push [ENT].
3 Select "Your Call Sign"
4 Select a destination name or call sign
• Returns to the DR screen, and "Rick" is displayed in
"TO"
TIP: After selecting a destination, you can select
another station preset in your transceiver by
rotating [DIAL]
[Up]
[ENT]
[Down]
(Example: Rick)
D Using RX History
When a call is received in the DV mode, the call data
is saved in the RX History
Up to 50 callers, and only the last called call signs, a
total of 51 histories can be saved
Example: Selecting "Rick" in the RX History
1 Hold down [DR] for 1 second to display the DR
screen
2 Push [RX→CS] to select "TO," then push [ENT].
3 Select "RX History"
4 Select a destination name or call sign
• Returns to the DR screen, and "Rick" is displayed in
"TO"
TIP: To add an RX HISTORY data to the "Your Call
Sign" memory, push [QUICK], then select "Add To
Your Memory"
4-10
[Up]
[ENT]
[Down]
(Example: Rick)