Menu Screen - Icom ID-31A PLUS Advanced Manual

10
REPEATER AND DUPLEX OPERATIONS
FM Repeater operation
D Checking the Repeater input signal
You can check whether or not that another station's
transmit signal can be received directly (not through
a Repeater), by listening to the Repeater input
frequency
Hold down [SQL] to listen on the Repeater input
frequency
Information
L
• While monitoring, the status indicator lights green
and an S/RF meter dot blinks
• While monitoring, the displayed frequency
automatically changes to the transceiver transmit
frequency (Repeater input frequency)
• When the other station's signal can be directly
received, move to a non-Repeater frequency and
use simplex (Duplex OFF)
Display while monitoring
D 1750 Hz tone burst
A 1750 Hz tone is required to access many European
Repeaters
L This operation is only for the ID-31E PLUS
1 Push [MENU]
2 Select "DTMF/T-CALL"
3 Select "DTMF Memory"
4 Select "T-CALL"
5 Push [MENU] to exit the MENU screen
6 Rotate [DIAL] to set the frequency received from a
Repeater
7 Set the offset frequency and the Duplex direction
(p 10-4)
• The Duplex icon is displayed
8 While holding down [PTT] to transmit, push [SQL]
to transmit a 1750 Hz tone signal
• Accesses the Repeater with a short tone burst
9 Operate in the normal way
L In the same way as a simplex call, alternately
transmit and receive
10-3
[Up]
[ENT]
[Down]