Dtmf/T-Call Items - Icom ID-31A PLUS Advanced Manual

11
MENU SCREEN
SPEECH items
SPEECH Speed
MENU > SPEECH > SPEECH Speed
Set the speech speed to Slow or Fast�

DTMF/T-CALL items

NOTE: The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version's default settings, see page 11-3�
You can set the DTMF tone code and DTMF Memory
channel for DTMF tone operation�
See page 12-6 for details�
DTMF Memory
MENU > DTMF/T-CALL > DTMF Memory
Displays a list of the DTMF Memory channels�
• T-CALL: 1750 Hz tone burst signal
• d0 ~ d#: DTMF memory channel list
(Default: Fast) SPEECH Level
MENU > SPEECH > SPEECH Level
Adjust the voice synthesizer volume level to between
0 (OFF), 1 (minimum) and 9 (maximum)�
L The voice synthesizer audio output level is linked with the
(Default: d0) DTMF Speed
MENU > DTMF/T-CALL > DTMF Speed
Select the DTMF transmit speed�
• 100ms: Transmits the DTMF codes at about 100
• 200ms: Transmits the DTMF codes at about 200
• 300ms: Transmits the DTMF codes at about 300
• 500ms: Transmits the DTMF codes at about 500
11-30
[VOL] setting from the minimum audio volume up to this
set level�
milliseconds per code�
5 characters per second�
milliseconds per code�
2�5 characters per second�
milliseconds per code�
1�6 characters per second�
milliseconds per code�
1 character per second�
(Default: 7)
(Default: 100ms)