Icom ID-31A PLUS Advanced Manual page 28

4
D-STAR OPERATION
"FROM" (Access repeater) setting
D Using your transceiver's repeater list
When your access repeater is in your transceiver's
repeater list, you can select it from the list By just
selecting the repeater from the list, the repeater call
sign, its frequency, duplex setting, and frequency
offset are automatically set for easy operation
Example: Selecting the "Hirano" repeater in Japan
from the repeater list
1 Hold down [DR] for 1 second to display the DR
screen
2 Push [DR] to select "FROM," then push [ENT]
3 Select "Repeater List"
4 Select the repeater group where your access
repeater is listed
5 Select your access repeater
• Returns to the DR screen, and the selected repeater
name, frequency, and call sign are displayed in
"FROM"
L The repeater list, described in this manual, may differ
from your transceiver's preloaded contents
[Up]
[ENT]
[Down]
(Example: "11: Japan")
(Example: "Hirano")
TIP:
When you select an FM repeater:
When an FM repeater is in your transceiver's
repeater list, you can select it from the list
When selecting an FM repeater, the "TO" setting is
not necessary and a "---" is displayed in "TO"
When selecting an FM repeater
How to change the repeater group:
To change the repeater group on the DR screen,
push [QUICK], then select "Group Select"
4-4