Icom ID-31A PLUS Advanced Manual page 67

4
D-STAR OPERATION
Are your settings correct?
If you make a Local Area call with a gateway setting
still selected in "TO," the destination repeater will be
busy while you transmit
The stations that want to use the repeater as their
Access repeater cannot access it, as shown below
BE SURE to set CQCQCQ in "TO" on the DR screen
when you intend to make a Local Area call, or after
you finish a Gateway call.
Example: JG3LUK wants to make a Local Area call
CQ D-STAR Hirano, this is JG3LUK CQ D-STAR Hirano, this is JG3LUK
through JP3YHH port A for a Local call... through JP3YHH port A for a Local call...
Caller
(JG3LUK)
JG3LUK's setting
The destination ("TO") setting is incorrect
Correct setting
To make a Local Area call, set the
destination ("TO") to "CQCQCQ"
See page 4-9 for details
Hirano repeater
Hirano area
Hamacho repeater
INTERNET INTERNET
Called
NOTE: With this setting, you can make a Local
Area call, but the destination Repeater, selected in
"TO," is also busy while you transmit
The stations that want to use the repeater as their
Access Repeater cannot access it
4-43
His setting is wrong! His setting is wrong!
I can't access the repeater! I can't access the repeater!
Hamacho area