Icom ID-31A PLUS Advanced Manual page 47

4
D-STAR OPERATION
Automatic DV detection
If you receive an FM signal while in the DV mode, the
"DV" and "FM" icons alternately blink to indicate the
received signal is FM
When the DV Auto Detect function is ON, the
transceiver automatically selects the FM mode to
temporarily monitor the signal (Default: OFF)
L Regardless of this setting, the "DV" and "FM" icons
alternately blink if you receive an FM signal while in
the DV mode
NOTE: When Digital Call Sign squelch (DSQL)
or Digital Code squelch (CSQL) is selected, the
transceiver does not receive FM signals, even if
this function is ON You can silently wait for calls
from others
When an FM signal is received while in the DV mode
DV Auto Detect function: OFF
The "DV" and "FM" icons alternately blink, but the
audio cannot be heard
The icons
▲▼
alternately blink
• • •
You cannot hear
the audio
4-23
MENU > DV Set > DV Auto Detect
1 Push [MENU]
2 Select "DV Set"
3 Select "DV Auto Detect"
4 Select "ON"
L To exit the MENU screen, push [MENU].
L When an FM signal is received while in the DV
mode, the "DV" and "FM" icons sequentially blink,
and the transceiver receives the signal in the FM
mode
DV Auto Detect function: ON
The "DV" and "FM" icons alternately blink, and the
audio can be heard
The icons
▲▼
alternately blink
[Up]
[ENT]
[Down]
Thanks for
the nice QSO!
You can hear the
audio!