Icom ID-31A PLUS Advanced Manual page 36

4
D-STAR OPERATION
"TO" (Destination) setting
D Directly entering (RPT)
The destination repeater call sign can be directly
entered
NOTE: BE SURE to include a "/" at the beginning
and the node letter as the 8th digit See page 4-2
"IMPORTANT" about the node letters
Example: Directly entering the call sign "/JP3YDHA"
1 Hold down [DR] for 1 second to display the DR
screen
2 Push [RX→CS] to select "TO," then push [ENT].
3 Select "Direct Input (RPT)"
4 Enter a call sign of up to 8 characters, including
spaces
L See page iii on how to enter characters
5 After entering, push [ENT]
• Returns to the DR screen, and "/JP3YDHA" is
displayed in "TO"
L After entry, you can correct the call sign in the
DIRECT INPUT (RPT) screen
L The entered call sign remains on the DIRECT INPUT
(RPT) screen, until you enter a new call sign
TIP:
If the entered call sign is duplicated in the repeater
list, the name is displayed in "TO" (Only when the
name has been entered)
[Up]
[ENT]
[Down]
4-12