Table of Contents
Advertisement
The output example displays the status for power supply 1 as OK.
NOTE
If a power supply has shut down, power to the interface module may be lost, as there may not be enough power remaining in
the system to keep the module powered.
Syntax: power-on [ power-supply decimal ]
The decimal variable specifies a power supply index number.
Replacing a power supply
To replace a power supply, have the following items available:
•
A new power supply (AC or DC), which you can order from Brocade
•
A small flat-blade or Phillips screwdriver (Brocade MLXe Series-4 and Brocade 32-slot modules)
CAUTION
Remove the power cord from a power supply before you install it in or remove it from the device. Otherwise, the power
supply or the device could be damaged as a result. (The device can be running while a power supply is being installed or
removed, but the power supply itself should not be connected to a power source.)
CAUTION
To prevent damage to the chassis and components, never attempt to lift the chassis using the fan or power supply handles.
These handles were not designed to support the weight of the chassis.
1.
Disconnect the power supply from the power source.
2.
Disconnect the power cables from the power supply.
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
Replacing a power supply
253
Advertisement
Table of Contents
