Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 141

FIGURE 63 Saddle installation
1. Front (port side) of rack mounting post
FIGURE 64 Slide the device into the rack
1. Align bottom of router slightly above the seat of the saddle
using mechanical lift
4. Use the provided standard #12-24, #10-32 or M6 pan head screws (dependent on the specifications of your rack) in each
available hole on the rack mount bracket to attach the router to the rack mounting poles, as shown in the following figure.
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
Installing a Brocade MLXe Series-32 router
2. Rear side of rack mounting post
2. Using at least two people, slide router gently onto saddle and
into the rack
141