Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 264

Replacing fan assemblies
2. Pull the filter tray away from the router as shown in one of the following two figures.
FIGURE 117 Replacing an air filter in a Brocade MLXe Series 4-slot router.
1
2
FIGURE 118 Air filter removal and replacement for the Brocade MLXe Series 8-slot router.
1
2
3. Remove the old air filter from the tray and discard it.
4. Insert the replacement air filter into the air filter tray.
5. Replace the filter tray in the router and tighten the two screws.
264
Air filter
Air filter tray
Air filter
Air filter tray
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04