Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 85

FIGURE 26 Rear fan locations for Brocade MLXe Series 32-slot routers
1. Fan module 1
2. Fan module 2
3. Fan module 3
4. Fan module 4
5. Fan module 5
At startup, the fans operate at high speed. After a period of time, the management module changes the fan speed to low.
By default, the router polls the temperature sensor on each module every 60 seconds for a temperature reading. Depending on the
results, the router will:
• Leave the fan speed as is
• Increase the fan speed
• Decrease the fan speed
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
6. Fan module 6
7. Fan module 7
8. Fan module 8
9. Fan module 9
10. Fan module 10
Router modules
85