Table of Contents
Advertisement
Installing a Brocade MLXe Series-32 router
12. Once the chassis is securely inserted in the rack, fasten the mounting brackets to the front rails of the rack using 10-32 screws
(eight screws per side) and either clip nuts or floating nuts, whichever is appropriate for your rack type (see the following figure).
FIGURE 73 Securing the chassis in rack
Your rack installation is complete.
Installing modules in the Brocade MLXe Series-32 router
The Brocade MLXe Series-32 router ships with empty module slots and upper and lower shipping panels installed.
For instructions about installing 2x100GbE interface modules, refer to
Series routers
on page 90.
152
Installing 2x100GbE CFP2 interface modules in Brocade MLXe
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
Advertisement
Table of Contents
