Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 123

3. Attach the front mounting brackets to the chassis using eight 6-32 flat head screws.
Brackets are marked with A or B. As you face the front of the EIA rack, A brackets must be installed on the left side, and B
brackets are installed on the right side. Do not mix A and B brackets. Refer to the following figure. The process is identical for 4-
slot and 8-slot routers.
FIGURE 46 Attach front mounting brackets to the router (MLXe-4 shown)
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
Mounting Brocade MLXe Series-4, -8, or -16 routers in a 4-post EIA rack
123