3.
Mount the lowest router first. With one person on each side, lift the router and slip the widest part of each keyhole slot on the
mounting bracket over the corresponding screw in the rack post, as shown in the following figure.
FIGURE 27 Positioning the mounting screws in rack posts
1.
Unequal flange equipment rack
FIGURE 28 Positioning the mounting screws in rack posts
1.
Unequal flange equipment rack
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
Installing a Brocade MLXe Series-4 router
2.
Network equipment rack
2.
Network equipment rack
95