6.
Once the chassis is securely inserted in the rack, fasten the mounting ears to the front rails of the rack using 10-32x.63 Phillips
Square cone screws. Refer to the following figure.
FIGURE 69 Secure chassis in rack
Your rack installation is complete.
Installing the rack mount kit on a 32-slot router in a four-post flush-mount EIA rack
You can mount the Brocade MLXe Series 32-slot routers in a four-post EIA rack using the optional four-post flush-mount
rack-mount kit RMK-4POST-MLXE-32.
NOTE
The RMK-4POST-MLXE-32 rack-mount kit cannot be used for installing the Brocade MLXe Series 32-slot routers
in an EIA rack with doors. For installing a Brocade MLXe Series-32 in an EIA rack with doors, use the RMK-CAB-
MLXE-32 rack mount kit which can be purchased from Brocade.
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
Installing a Brocade MLXe Series-32 router
147