Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 263

3. Insert a new filter, being careful that it aligns within the narrow channel.
4. Repeat steps 2 and 3 to replace the second filter.
5. Replace the air inlet cover and tighten the four captive screws to secure the air filter to the router.
FIGURE 116 Air filter removal and replacement for 32-slot routers
1
Replacing the air filter in Brocade MLXe 4-slot and 8-slot routers
Follow these steps to replace the air filter in Brocade MLXe Series 4-slot and 8-slot routers.
1. Loosen the two screws in the front of the filter tray.
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
Direction of airflow in device
Replacing fan assemblies
263