FIGURE 14 BR-MLX-1GFx24-X and BR-MLX-1GFx24-X-ML fiber interface module front panel
The front panel includes the following features:
•
Arrow-shaped LEDs in center horizontal strip for all ports. LEDs to the left support the top ports, LEDs to the right (pointing
down) support the bottom ports.
•
24 1 Gbps fiber ports
The following table describes the port status for the BR-MLX-1GFx24-X and BR-MLX-1GFx24-X fiber module.
TABLE 19 BR-MLX-1GFx24-X and BR-MLX-1GFx24-X fiber module LEDs
Position
Arrow-shaped LEDs in center horizontal strip
between ports. Left LEDs support upper ports.
Right LEDs support lower ports.
For a list of SFP optics supported for the BR-MLX-1GFx24-X and BR-MLX-1GFx24-X interface modules, refer to the latest version of
the Brocade Optics Family Data Sheet.
Power supply requirements for BR-MLX-1GFx24-X and BR-MLX-1GFx24-X-ML interface modules
For power supply requirements for BR-MLX-1GFx24 and BR-MLX-1GFx24-X ML (24-port 1 Gbps) fiber interface modules, refer to
Hardware specifications for Brocade MLXe Series routers
20-port 100/1000 Ethernet interface module
The front panel includes the following features:
•
LEDs to the left support the top ports, LEDs to the right support the bottom ports
•
20 100/1000 Ethernet SFP ports
FIGURE 15 20-port 100/1000 Ethernet module front panel
The following table describes the port LED status of the 20-port 100/1000 Ethernet module.
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
State
Solid green
Green blinking
Off
on page 271.
Meaning
A link has been established.
The port is transmitting and receiving packets.
No link exists, and the port is not transmitting or
receiving packets.
Router modules
69