Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 240

IPv6 ND Proxy
ipv6 nd local-proxy
Configures an IPv6 interface to support IPv6 ND local proxy.
ipv6 nd local-proxy
no ipv6 nd local-proxy
This feature is disabled.
The ipv6 nd proxy is configurable under the global configuration mode.
The IPv6 ND local-proxy command is supported over the VE interface. It is not supported for the VEoVPLS interface.
Use the no form of this command to remove the IPv6 ND local-proxy configuration.
Limitations and pre-requisites
The ipv6 nd local-proxy command is supported for the VE interface, but not for the VE over VPLS interface.
To enable the IPv6 ND local-proxy feature for the node:
R2>#en
No password has been assigned yet...
R2#conf t
R2(config)#int eth3/1
R2(config-if-e10000-3/1)#ipv6 nd local-proxy
R2(config-if-e10000-3/1)#
240
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04