Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 29

TABLE 6 Management modules for all Brocade MLXe Series routers (continued)
Part number
NI-MLX-32-MR
NI-XMR-MR
NI-XMR-32-MR
BR-MLX-MR2-M
BR-MLX-MR2-X
BR-MLX-32-MR2-M
BR-MLX-32-MR2-X
The management module controls the hardware components, runs the networking protocols, and provides the Real Time Operating
System (RTOS).
Each router requires one management module, and can accommodate a second module for redundancy. A redundant management
module works in conjunction with the active management module. If the active module becomes unavailable, the redundant
management module automatically takes over the system operation, minimizing system downtime. For information about the
redundancy feature, refer to the "Using a Redundant Management Module" chapter in the Brocade NetIron Switching Configuration
Guide.
Management modules are installed in dedicated slots marked M1 and M2. By default, the module installed in slot M1 is the active
management module.
Management modules are hot-swappable, which means you can remove and replace them without powering down the system.
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
Description
10/100/1000 Ethernet ports for out-of-band
management.
(MR) Brocade MLXe Series-32 and Brocade NetIron
MLX Series-32 management module, 1 GB SDRAM,
dual auxiliary flash slots, EIA or TIA-232 and
10/100/1000 Ethernet ports for out-of-band
management.
(MR) Brocade NetIron XMR Series management
module, 2 GB SDRAM, dual auxiliary flash slots, EIA or
TIA-232 and 10/100/1000 Ethernet ports for out-of-
band management.
(MR) Brocade NetIron XMR Series 32000
management module, 2 GB SDRAM, dual auxiliary
flash slots, EIA or TIA-232 and 10/100/1000
Ethernet ports for out-of-band management.
(MR2) MLXe/MLX Gen2 management (M) module for
4-, 8- and 16-slot systems. Includes 4 GB RAM, 1
internal compact flash drive (2 GB), 1 external compact
flash slot with included 2 GB card, RS-232 serial
console port and 10/100/1000 Ethernet port for
management.
(MR2) MLXe/XMR Gen2 management (X) module for
4-, 8- and 16-slot systems. Includes 4 GB RAM, 1
internal compact flash drive (2 GB), 1 external compact
flash slot with included 2 GB card, RS-232 serial
console port and 10/100/1000 Ethernet port for
management.
(MR2) MLXe/MLX Gen2 management (M) module for
32-slot systems. Includes 4 GB RAM, 1 internal
compact flash drive (2 GB), 1 external compact flash
slot with included 2 GB card, RS-232 serial console
port and 10/100/1000 Ethernet port for
management.
(MR2) MLXe/XMR Gen2 management (X) module for
32-slot systems. Includes 4 GB RAM, 1 internal
compact flash drive (2 GB), 1 external compact flash
slot with included 2 GB card, RS-232 serial console
port and 10/100/1000 Ethernet port for
management.
Notes
This module is no longer supported from
NetIron R05.7.xx.
This module is no longer supported from
NetIron R05.7.xx.
This module is no longer supported from
NetIron R05.7.xx.
You must use one of the relevant MR2 modules
starting from NetIron R05.8.00.
You must use one of the relevant MR2 modules
starting from NetIron R05.8.00.
You must use one of the relevant MR2 modules
starting from NetIron R05.8.00.
You must use one of the relevant MR2 modules
starting from NetIron R05.8.00.
Router modules
29