Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 124

Mounting Brocade MLXe Series-4, -8, or -16 routers in a 4-post EIA rack
4. Attach the side plates A and B to the rear of the router, using eight 6-32 flat-head screws, as shown in the following figure.
FIGURE 47 Attach side plates to the rear of the router (MLXe-4 shown)
NOTE
There are two sizes of side plates to accommodate EIA racks with depths of 27-28 inches, and depths of 29-31
inches. Be sure to select the side plate that is appropriate for your EIA rack.
5. The mounting shelf adjusts to accommodate racks with depths from 27 to 31 inches, for both 4-slot and 8-slot routers. Slide
the adjustable rails to the proper depth for your installation, and Install the mounting shelf to the rack rails using eight 10-32
screws, as shown in the following figure.
FIGURE 48 Install the mounting shelf in the rack
124
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04