3.
Remove the fan assembly by grasping the handle on the faceplate and pulling the assembly toward you as shown in
the rear fan assemblies in 16-slot routers
DANGER
The Brocade NetIron MLX Series 32 fan assembly is heavy and will be off-balance as you remove it. Use both
hands on the handle.
DANGER
Be careful not to accidently insert your fingers into the fan tray while removing it from the chassis. The fan may
still be spinning at a high speed.
FIGURE 111 32-slot router fan assemblies
1
2
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04
on page 258. Pulling the fan assembly unseats the fan connector from the device.
Fan module 1
Fan module 2
6
Fan module 6
7
Fan module 7
Replacing fan assemblies
Replacing
257