Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual page 140

Installing a Brocade MLXe Series-32 router
3. Align the holes in the saddle with the holes on the mounting posts and attach the saddle using a minimum of eight standard
pan head screws that were provided in the kit, either #12-24, #10-32, or M6, as appropriated for your rack (four screws on
each post, in the three top holes and one bottom hole). See
NOTE
Additional screws may be used for more support.
FIGURE 62 Align the saddle in the rack
1. Saddle
140
Figure 63.
2. Seat of saddle aligns with U marking on mounting posts as
shown
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04