Installing Modules In The Brocade Mlxe-32 Router - Brocade Communications Systems MLX Series Installation Manual

2
Installing a Brocade MLXe-32 router
FIGURE 87
Your rack installation is complete

Installing modules in the Brocade MLXe-32 router

The Brocade MLXe-32 router ships with empty module slots and upper and lower shipping panels
installed.
For instructions about installing 2x100GbE interface modules, refer to
interface modules in Brocade MLXe routers"
DANGER
The intra-building ports of the equipment or subassembly are suitable for connection to
intra-building or unexposed wiring or cabling only. The intra-building ports of the equipment or
subassembly MUST NOT be metallically connected to interfaces that connect to the outside plant
122
Secure chassis in rack
on page 67.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
"Installing 2x100GbE
53-1002373-02