D-Link xstack DGS-3620 series Reference Manual page 545

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the IGMP proxy:
DGS-3620-28PC:admin#disable igmp_proxy
Command: disable igmp_proxy
Success.
DGS-3620-28PC:admin#
44-3 config igmp_proxy downstream_if
Description
This command is used to configure the IGMP proxy downstream interfaces. The IGMP proxy plays
the server role on the downstream interfaces. The downstream interface must be an IGMP-
snooping enabled VLAN.
Format
config igmp_proxy downstream_if [add | delete] vlan [<vlan_name 32> | vlanid <vidlist>]
Parameters
add - Specifies to add a downstream interface.
delete - Specifies to delete a downstream interface .
vlan – Specifies the VLAN by name or ID.
<vlan_name 32> - Enter a name of VLAN which will be added to or deleted from the IGMP
proxy downstream interface. The maximum length is 32 characters.
vlanid - Specifies a list of VLAN IDs to be added to or deleted from the IGMP proxy
downstream interface.
<vidlist> - Enter a list of VLAN IDs which will be added to or deleted from the IGMP proxy
downstream interface.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the IGMP proxy's downstream interface:
DGS-3620-28PC:admin#config igmp_proxy downstream_if add vlan vlanid 2-7
540