D-Link xstack DGS-3620 series Reference Manual page 964

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To create an entry for a specific RP in which the checksum in the registered packet will include the
data portion:
DGS-3620-28PC:admin# create pim register_checksum_include_data rp_address
24.1.2.3
Command: create pim register_checksum_include_data rp_address 24.1.2.3
Success.
DGS-3620-28PC:admin#
82-19 delete pim register_checksum_include_data rp_address
Description
This command is used to delete the register checksum including the data for the specific RP
address.
Format
delete pim register_checksum_include_data rp_address <ipaddr>
Parameters
rp_address - Specifies the RP address that will be removed from the checksum, including the
data portion list.
<ipaddr> - Enter the RP address used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the register checksum including the data for the specific RP address:
DGS-3620-28PC:admin# delete pim register_checksum_include_data rp_address
10.54.71.9
Command: delete pim register_checksum_include_data rp_address 10.54.71.9
Success.
DGS-3620-28PC:admin#
82-20 show pim register_checksum_include_data_rp_list
Description
This command is used to list all the RPs of the registered checksum, including the data.
959