D-Link xstack DGS-3620 series Reference Manual page 1237

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display the URPF settings of all the ports:
DGS-3620-28PC:admin#show ip urpf
Command: show ip urpf
URPF Global State
Port Mode Default Route Check
------ --------- -------------------
1:1 Strict Enabled
1:3 Strict Enabled
1:5 Strict Enabled
1:7 Strict Enabled
1:9 Disabled Disabled
1:11 Disabled Disabled
1:13 Disabled Disabled
1:15 Disabled Disabled
1:17 Disabled Disabled
1:19 Disabled Disabled
1:21 Disabled Disabled
1:23 Disabled Disabled
1:25 Disabled Disabled
DGS-3620-28PC:admin#
118-5 delete ip urpf ports
Description
This command is used to remove URPF checking from one or more ports. After URPF checking
was removed from one port, its mode and default route checking option will be restored to the
default value.
Format
delete ip urpf ports [<portlist> | all]
Parameters
ports - Specifies the list of ports that will be used for this configuration.
<portlist> - Enter the list of ports that will be used for this configuration.
all - Specifies that all the ports will be used for this configuration.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
: Disabled
Port
------ --------- -------------------
1:2
1:4
1:6
1:8
1:10
1:12
1:14
1:16
1:18
1:20
1:22
1:24
1:26
1232
Mode Default Route Check
Strict Enabled
Strict Enabled
Strict Enabled
Strict Enabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled