Chapter 25 Dhcpv6 Relay Commands - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 25
Commands
enable dhcpv6_relay
disable dhcpv6_relay
config dhcpv6_relay hop_count <value 1-32>
config dhcpv6_relay [add | delete] ipif <ipif_name 12> <ipv6addr>
config dhcpv6_relay ipif [<ipif_name 12> | all] state [enable | disable]
show dhcpv6_relay {ipif <ipif_name 12>}
config dhcpv6_relay option_37 {state [enable | disable] | check [enable | disable] | remote_id
[default | cid_with_user_define <desc 128>| user_define <desc 128>]}(1)
25-1 enable dhcpv6_relay
Description
This command is used to enable the DHCPv6 relay function on the Switch.
Format
enable dhcpv6_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the DHCPv6 relay global state to enable:
DGS-3620-28PC:admin# enable dhcpv6_relay
Command: enable dhcpv6_relay
Success.
DGS-3620-28PC:admin#
25-2 disable dhcpv6_relay
Description
This command is used to disable the DHCPv6 relay function on the Switch.
DHCPv6 Relay
425