D-Link xstack DGS-3620 series Reference Manual page 807

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display the MLD snooping group:
DGS-3620-28PC:admin#show mld_snooping group
Command: show mld_snooping group
Source/Group
VLAN Name/VID
Member Ports
UP Time
Expiry Time
Filter Mode
Source/Group
VLAN Name/VID:
Member Ports
UP Time
Expiry Time
Filter Mode
Source/Group
VLAN Name/VID
Member Ports
UP Time
Expiry Time
Filter Mode
Total Entries : 3
DGS-3620-28PC:admin#
69-17 show mld_snooping mrouter_ports
Description
This command is used to display the router ports on the switch.
Format
show mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list> | all] {[static
| dynamic | forbidden]}
Parameters
vlan - Specifies the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the name of the VLAN on which the router port resides. The
maximum length is 32 characters.
vlanid - Specifies the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter a list of VLAN IDs.
all - Specifies all VLANs on which the router port resides.
static - (Optional) Display router ports that have been statically configured.
dynamic - (Optional) Display router ports that have been dynamically learned.
forbidden - (Optional) Display forbidden router ports that have been statically configured.
: 2001::1/FE1E::1
:default/1
: 1-2
: 26
: 258
: INCLUDE
: 2002::2/FE1E::1
: default/1
: 3
: 29
: 247
: EXCLUDE
: NULL/FE1E::2
: default/1
: 4-5
: 40
: 205
: EXCLUDE
802